Docomo Arrows X F-10D Instruction Manual Page 85

  • Download
  • Add to my manuals
  • Print
  • Page
    / 173
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 84
Settings
83
Usage precautions for fingerprint
sensor
Usage precautions for fingerprint sensor are as follows:
The sheet on the fingerprint sensor is a protective film to
maintain waterproofness. Do not remove or poke the
film with a pointed object such as a pen.
The fingerprint sensor is waterproof, however
malfunction may occur if a drop or water or dirt adheres
to the surface of the fingerprint sensor or your finger.
Wipe any water or dirt with a soft cloth before use. Also
wrinkled finger with water may cause malfunction.
The following conditions may cause failure or damage:
- Strike or give a hard shock
- Scratch or pick with a pointed object
- Rub hard with a fingernail or hard object such as metal
piece of strap and scratch the surface of the fingerprint
sensor
- Scratch or stain the surface of the fingerprint sensor
with soil etc.
- Cover with a sticker or paint with ink etc.
The following conditions may make fingerprint scanning
difficult or reduce the authentication performance. Clean
the surface of the fingerprint sensor from time to time.
- Dirt of dust, sebum, etc. attachment or condensation of
moisture of sweat etc.
When the following phenomenon occurs, clean the
surface of fingerprint sensor. The phenomenon may be
improved.
- "Clean surface of sensor." appears
- Fingerprint registration or authentication fails often
To clean the fingerprint sensor, wipe its surface with a
dry, soft and static-free cloth. Long-term use may cause
the fingerprint sensor to get dusty, but do not try to
remove the dust with a pointed object even in such a
case.
Static electricity may cause malfunction. Before placing
the finger on the fingerprint sensor, eliminate static
electricity by touching a metal object with the hand etc.
Take particular care in dry seasons such as winter.
Registering fingerprint
Register your fingerprint for authentication.
To use fingerprint authentication, register 2 or more
fingerprints. Up to 10 items can be registered.
1
From the Home screen,
m
[Settings]
[Security]
[Fingerprint settings]
When Security unlock method is set, authentication
is required.
2
Select a finger to register
Following the
onscreen message, put your finger onto the
fingerprint sensor and then slide
Register second fingerprint in the same operation.
Deleting registered fingerprint : Select a fingerprint
[Yes]
When the security unlock method is set to
fingerprint authentication, you cannot delete the
registration if there are 2 registrations in all.
3
[OK]
Operating fingerprint authentication
1
When a fingerprint authentication screen is
displayed, slide the registered finger the on
the fingerprint sensor
If the authentication is failed, remove the finger
from the fingerprint sensor and retry
authentication.
Page view 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 172 173

Comments to this Manuals

No comments